| 翻訳と辞書 |
| Pratt & Whitney Canada JT15D-4 ： ウィキペディア英語版 |
Pratt & Whitney Canada JT15D
The Pratt & Whitney Canada JT15D is a small turbofan engine built by Pratt & Whitney Canada. It was introduced in 1971 at thrust, and has since undergone a series of upgrades to just over thrust in the latest versions. It is the primary powerplant for a wide variety of smaller jet aircraft, notably business jets. Over 6,000 JT15D's have been delivered since the 1970s, with over 30 million hours of operation.
==Design and development==
The JT15D is rare among modern turbofans in that it uses a centrifugal compressor as its main high-pressure system.〔Gunston 1989, p.131.〕 This was a common feature of early jet engines, but was quickly replaced by axial compressors in most roles due to its large frontal size. In the turbofan role most of the jet thrust is generated by the cold air blown past the engine, and the internal "jet" portion is quite small. In this role the high single-stage compression of the centrifugal design has advantages, and the main reason most small turbofans don't use them is that they are often developments of previous turbojet designs.
In the JT15D the fan blows about 70% of the air into the bypass duct, producing most of the overall thrust. On JT15D-4 models and above there is a small "booster" axial stage just behind the fan which is running at the same speed as the fan and directing the remaining 30% of the airflow into the engine core. This air is further compressed by the centrifugal stage, and burned in a reverse-flow annular combustor. The hot gases flow through a "high-pressure" turbine that drives the centrifugal stage, and then two more turbines driving the fan and booster.
The engine was first run in August 1967 before being test flown on a Avro Canada CF-100 Canuck in an underslung external test pod.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Pratt & Whitney Canada JT15D」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|